4.2 Extension 1: Minimum Compartment Volumes

Accompanying Workbook: olm_extension_1.xlsx

In our first example, there were no minimum volumes associated with compartments. Opturion Fuel desire to have compartments filled to at least 3,600 litres.

We will now add the minimum compartment volume constraint. This constraint is applied to the order and ensures that any compartment containing that order is filled to a minimum level. An example of this is shown in Table 1.

Id Site Product Target Volume Maximum Volume Minimum Compartment Volume
Order 1 Site 1 ULP 16,600 16,600 3,600
Table 1: Minimum compartment volume.

Re-running the optimiser with this new constraint produces the compartment volumes seen in Figure 19. Note that here we now see the yellow lines indicating the minimum fill volume for that compartment.

PIC

Figure 19: Extension 1 solution compartments.

When comparing this solution against that in Figure 18 we can see that the volume in the fourth compartment has been increased to meet the minimum compartment volume of 3,600 litres. This causes the volumes in the other compartments to be adjusted to ensure the compatibility constraints are met.