3.7 Extension 6: Driver Breaks

Download Workbook: pdp_extension_6.xlsx.

Managing driver breaks is an important part of the delivery schedule, and when Opturion Freight decides to implement a fatigue management strategy, they realise they can use DTO to choose the optimal times to allocate these breaks.

DTO lets you define break schemes and assign them to vehicles. Each vehicle can have at most one break scheme but a single break scheme can be assigned to multiple vehicles.

A commonly used break scheme is the Basic Fatigue Management hours as seen in Table 10.

Time Work Rest
In any period of… A driver must not work for more than a maximum of… And must have the rest of that period off work with at least a minimum rest break of…
6.25 hours 6 hours work time 15 continuous minutes rest time
9 hours 8.5 hours work time 30 minutes rest time in blocks of 15 continuous minutes
12 hours 11 hours work time 60 minutes rest time in blocks of 15 continuous minutes
Table 10: Basic Fatigue Management.
Id Number of Breaks Duration Interval
BFM 1 00:15 06:15
BFM 2 00:15 09:00
BFM 4 00:15 12:00
Table 11: Example break scheme.

Table 11 shows how these break rules are specified.

  • 1 x 15-minute break within 6.25 hours of starting the shift.
  • 2 x 15-minute breaks within 9 hours of starting the shift.
  • 4 x 15-minute breaks within 12 hours of starting the shift.

The above break scheme is defined in the Fatigue Management sheet of the accompanying workbook.

Other aspects of breaks apply to how, and where, they can occur. While a break scheme can be shared between vehicles, these other aspects are controlled on a per-vehicle basis. Each vehicle has the following break related options:

  • Paid Breaks: The cost per hour is considered when allocating breaks.
  • Forbid Loaded Breaks: Breaks cannot occur while orders are loaded on the vehicle.
  • Forbid Breaks During Transit: Breaks cannot occur between locations.

These can be seen in the Fleet sheet of the accompanying workbook.

Enabling fatigue management increases the time needed to solve a scenario.

For this example, we have increased the number of orders from twenty to forty to ensure that there is sufficient work available for driver breaks to be needed.

KPI Value
Total Cost 587.61
Total Distance 267.81
Work Time 14:26
Transit Time 05:41
Break Time 00:15
Assigned Orders 40 / 40
Fleet Usage 2 / 5
Table 12: Solution KPIs.

Table 12 contains a new KPI that shows the total amount of break time in the schedule.