2.5 Sheet: Axle Groups

This sheet is required. It must contain an entry for each axle group on the vehicle. Axle groups must be listed in order, from front to rear.

2.5.1 Column: Id

Required: Yes.
Type: Text or (integer) number.
Description: A unique identifier for the axle group. The identifier must not be GCM as this is reserved to define the Gross Combination Mass limit in weight schemes.

2.5.2 Column: Axle Count

Required: No.
Type: An (integer) number between 0 and 4 (inclusive).
Description: The number of axles in this axle group. A blank cell is equivalent to zero.

2.5.3 Column: Pin-to-Axle

Required: Yes.
Type: Number.
Description: The distance between the kingpin or front of the drawbar, to the centre of the axle group.

2.5.4 Column: Turntable

Required: Yes.
Type: Number.
Description: The distance between the kingpin or front of the drawbar, to the turntable. This cell can be left blank if there is no turntable on the axle group (i.e. on the trailer/dolly).

2.5.5 Column: Pin Tare

Required: Yes.
Type: Number.
Description: The tare weight as measured under the kingpin. Can be left blank (i.e. zero).

2.5.6 Column: Axle Tare

Required: Yes.
Type: Number.
Description: The tare weight as measured under the axle group (wheel set).