3.3 Sheet: General
This sheet is required.
3.3.1 Column: Parameter
Required: Yes.
Type: Text.
Description: Parameters that control the settings for the scenario.
3.3.2 Column: Value
Required: Yes.
Type: Text, Boolean or Number.
Description: Values of the parameters. Can be a number or text depending on the parameter.
3.3.3 Parameter: Scenario Name
Required: No.
Value Type: Text.
Default: No name.
Description: A name for the scenario.
3.3.4 Parameter: Iterations
Required: No.
Value Type: Number (positive integer).
Default: 3000.
Description: The number of iterations the optimiser will run for. (This parameter is ignored if the Iteration Scheme
parameter is also specified.)
3.3.5 Parameter: Unassigned Penalty Scheme
Required: No.
Value Type: String (one of FIXED or LEGACY).
Default: FIXED.
Description: The unassigned penalty scheme to use.
3.3.6 Parameter: Fixed Unassigned Penalty
Required: No.
Value Type: Number (positive integer).
Default: 30000.
Description: The value of the penalty for use by the FIXED unassigned penalty scheme.
3.3.7 Parameter: Rush Hour
Required: No.
Value Type: Text (Boolean).
Default: FALSE.
Description: If TRUE, then use the rush hour periods defined in the Rush Hour sheet.
3.3.8 Parameter: Use Miles
Required: No.
Value Type: Text (Boolean).
Default: FALSE.
Description: If TRUE, then distance values in the solution will be reported in miles instead of kilometres.
3.3.9 Parameter: Iteration Scheme
Required: No.
Value Type: Text.
Default: No iterations scheme used.
Description: The identifier of an iteration scheme defined in Iteration Schemes sheet for the optimiser to
use.
3.3.10 Parameter: Colocated Pickups
Required: No.
Value Type: Text (Boolean).
Default: FALSE.
Description: If TRUE, then enforce the Colocated Pickups constraint (Section 2.8).
3.3.11 Parameter: Geofence North
Required: No.
Value Type: Number in [-90, 90].
Default: none.
Description: Latitude of the northern boundary for locations in the scenario.
3.3.12 Parameter: Geofence East
Required: No.
Value Type: Number in [-180, 180].
Default: none.
Description: Longitude of the eastern boundary for locations in the scenario.
3.3.13 Parameter: Geofence South
Required: No.
Value Type: Number in [-90, 90].
Default: none.
Description: Latitude of the southern boundary for locations in the scenario.
3.3.14 Parameter: Geofence West
Required: No.
Value Type: Number in [-180, 180].
Default: none.
Description: Longitude of the western boundary for locations in the scenario.
3.3.15 Parameter: Hard Geofence Errors
Required: No.
Value Type: Boolean.
Default: FALSE.
Description: If TRUE, then treat any errors produced by geofence violations as being hard.
3.3.16 Parameter: Batched Loads
Required: No.
Value Type: Text (Boolean).
Default: TRUE.
Description: If TRUE, then enforce the Batched Loads constraint.
3.3.17 Parameter: Sticky Deliveries
Required: No.
Value Type: Text (Boolean).
Default: FALSE.
Description: If TRUE, then enable the Sticky Deliveries constraint.
3.3.18 Parameter: Cost Scale
Required: No.
Value Type: Number (positive).
Default: 0 (no scaling).
Description: Multiply all cost values by this number before solving. (See Scaling Factors in Section x12-110002.82.8.)
3.3.19 Parameter: Weight Scale
Required: No.
Value Type: Number (positive).
Default: 0 (no scaling).
Description: Multiply all weight values by this number before solving. (See Scaling Factors in Section x12-110002.82.8.)
3.3.20 Parameter: Volume Scale
Required: No.
Value Type: Number (positive).
Default: 0 (no scaling).
Description: Multiply all volume values by this number before solving. (See Scaling Factors in
Section x12-110002.82.8.)
3.3.21 Parameter: Maximum Neighbourhood Size
Required: No.
Value Type: Number (positive integer).
Default: 200.
Description: The value of the maximum neighbourhood size for the optimiser. (See Maximum Neighbourhood Size in
Section x12-110002.82.8.)
3.3.22 Parameter: Disable Replanning
Required: No.
Value Type: Text (Boolean).
Default: FALSE.
Description: If TRUE, then ignore the Previous Solution sheet if it is present.
3.3.23 Parameter: Previous-Vehicle Fixed Reward
Required: No.
Value Type: Number (nonnegative).
Default: 0.
Description: The strength of the preference for orders to remain on their previously assigned vehicles when
replanning.
3.3.24 Parameter: Previous-Vehicle Weight Reward
Required: No.
Value Type: Number (nonnegative).
Default: 0.
Description: The strength of preference for heavier orders to remain on their previously assigned vehicles when
replanning.
3.3.25 Parameter: Previous-Vehicle Volume Reward
Required: No.
Value Type: Number (nonnegative).
Default: 0.
Description: The strength of preference for larger orders to remain on their previously assigned vehicles when
replanning.
3.3.26 Parameter: Forbid Unrecognised Columns
Required: No.
Value Type: Boolean.
Default: FALSE.
Description: If TRUE, then treat any unrecognised column as an error.
3.3.27 Parameter: Arrival Only in Time Window
Required: No.
Value Type: Boolean.
Default: FALSE.
Description: If TRUE, then the optimiser will enable the Arrival Only in Time Window behaviour.
3.3.28 Parameter: Order Splitting Strategy
Required: No.
Value Type: Text (one of the Order Splitting Strategy codes).
Default: None.
Description: The order splitting strategy to use.
3.3.29 Parameter: Split Solve
Required: No.
Value Type: Boolean.
Default: FALSE.
Description: If TRUE, then the optimiser will attempt to split solve the scenario.
3.3.30 Parameter: Split Solve Jobs
Required: No.
Value Type: Number (positive integer).
Default: 2.
Description: If split solve is TRUE, then the number of sub-scenarios to solve concurrently.
Note: This value is limited according to the installation and any value above this will be reduced to this
limit.

